LG LRE30755SW Owner's Manual (English) - Page 26

English SELF-CLEAN The SELF-CLEAN pad is used to start a Self-Clean cycle. When used with START TIME pad, a delayed Self-Clean cycle may also be programmed. The Self-Clean function has cycle times of 2, 3, or 4 hours. To start an immediate Self-Clean cycle and shut off automatically 1. Be sure the clock is set with the correct time of day, the oven is empty and the oven door is closed. 2. Press SELF CLEAN once for a 3-hour clean time or twice for a 2-hour clean time or 3 times for 4-hour clean time. A 3-hour selfclean time is recommended for use when cleaning small, contained spills. A self-clean time of 4 hour is recommended for a dirtier oven. 3. Press START. The DOOR LOCKED icon will flash. 4. As soon as the control is set, the motor driven oven door lock will begin to close automatically. During the Self-Clean cycle • You may see some smoke and smell an odor the first few times the oven is cleaned. This is normal and will lessen in time. Smoke may also occur if the oven is heavily soiled or if a broiler pan was left in the oven. • As the oven heats, you may hear sounds of metal parts expanding and contracting. This is normal and will not damage the oven. • The oven doors will be damaged if the oven doors are forced to open when LOCK is still displayed. To set a delay start time of 8:00 o'clock 1. Press SELF CLEAN. Select the desired self clean time by pressing SELF CLEAN. 2. Press START TIME. Enter the desired Self-Clean starting time using the number 8, 0, and 0. 3. Press START. DELAY and CLEAN will remain on. 4. Self-Cleaning cycle will turn on automatically at the set time. Stopping or Interrupting a Self-Clean cycle: If it becomes necessary to stop or interrupt a Self-Cleaning cycle due to excessive smoke or fire in the oven: 1. Press CLEAR/OFF. 2. Once the oven has cooled down for approximately 1 HOUR, the "DOOR LOCKED" icon will no longer display and oven door can be opened. IMPORTANT NOTES when using the Self-Clean feature: • A Self--Clean cycle cannot be started if Oven Lockout feature is active. • If your clock is set for normal 12 hours display mode the Delayed Self-Clean can never be set to start more than 12 hours in advance.To set for a delayed Self-Clean cycle 1224 hours in advance see page 24 for instructions to set the control for the 24 hours time of day display mode. After the Self-Clean cycle • You may notice some white ash in the oven. Wipe it off with a damp cloth or a soapfilled steel wool pad after the oven cools. These deposits are usually a salt residue that cannot be removed by the clean cycle. If the oven is not clean after one clean cycle, repeat the cycle. • If oven racks were left in the oven and do not slide smoothly after a clean cycle, wipe racks and rack supports with a small amount of vegetable oil to make them easier to move. • Fine lines may appear in the porcelain because it went through heating and cooling. This is normal and will not affect performance. Español - 26 -