LG LRE30755SW Owner's Manual (English) - Page 31

Removing &replacing The, Lift-off Oven Door, Door Care Instructions

Page 31 highlights

English MAINTENANCE REMOVING &REPLACING THE LIFT-OFF OVEN DOOR CAUTION The door is very heavy. Be careful when removing and lifting the door. Do not lift the door by the handle. To remove the door: Step. 1 Open the door fully. Step. 2 Pull the hinge locks down toward the door frame to the unlocked position. Slot Hinge lock Lock Unlock Step. 3 Firmly grasp both sides of the door at the top. Step. 4 Close door to the door removal position, which is approximately 5 degrees. about 5° Step. 5 Lift door up and out until the hinge arm is clear of the slot. To replace the door: Step. 1 Firmly grasp both sides of the door at the top. Step. 2 With the door at the same angle as the removal position, seat the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully seated into the bottom of the slot. Hinge arm Bottom edge of slot Indentation Step. 3 Open the door fully. If the door will not open fully, the indentation is not seated correctly in the bottom edge of the slot. Step. 4 Push the hinge locks up against the front frame of the oven cavity to the locked position. Hinge arm Hinge lock Step. 5 Close the oven door. DOOR CARE INSTRUCTIONS • Most oven doors contain glass that can break. Read the following recommendations: 1. Do not close the oven door until all the oven racks are fully in place. 2. Do not hit the glass with pots, pans, or any other object. 3. Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time. Español - 31 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

- 31 -
English
Español
MAINTENANCE
REMOVING &REPLACING THE
LIFT-OFF OVEN DOOR
To remove the door:
Step. 1
Open the door fully.
Step. 2
Pull the hinge locks down
toward the door frame to
the unlocked position.
Step. 3
Firmly grasp both sides of the door at the top.
Step. 4
Close door to the door removal
position, which is approximately 5
degrees.
Step. 5
Lift door up and out until the hinge arm is clear of the slot.
To replace the door:
Step. 1
Firmly grasp both sides of the door at the top.
Step. 2
With the door at the
same angle as the
removal position, seat
the indentation of the
hinge arm into the
bottom edge of the
hinge slot. The notch in
the hinge arm must be
fully seated into the
bottom of the slot.
Step. 3
Open the door fully. If the door will not open fully, the
indentation is not seated correctly in the bottom edge of the
slot.
Step. 4
Push the hinge locks up against the
front frame of the oven cavity to
the locked position.
Step. 5
Close the oven door.
DOOR CARE INSTRUCTIONS
• Most oven doors contain glass that can break.
Read the following recommendations:
1.
Do not close the oven door until all the oven racks are
fully in place.
2.
Do not hit the glass with pots, pans, or any other object.
3.
Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later time.
The door is very heavy. Be careful when removing and
lifting the door. Do not lift the door by the handle.
CAUTION
Slot
Hinge
lock
Lock
Unlock
about 5°
Hinge arm
Indentation
Bottom
edge of
slot
Hinge arm
Hinge lock