LG WD205CK Owners Manual - Page 9

ENGLISH INSTALLATION INSTRUCTIONS 9 UNPACKING AND REMOVING SHIPPING MATERIAL 1. A fter removing the carton and shipping material, lift the washer off the foam base. Make sure the plastic tub support comes off with the base and is not stuck to the bottom of the washer. 4. Make sure the leveling legs on the front-loading washer are fully retracted before stacking it on top of the pedestal washer. Position the appliance on top of the pedestal washer. Washer legs Plastic Tub Support Carton Base If you must lay the washer down to remove the base packaging materials, always protect the side of the washer and lay it carefully on its side. DO NOT lay the washer on its front or back. 2. Save the foam block for future use. If the washer must be moved in the future, the foam block will help prevent damage to the washer during transportation. NOTE: To prevent damage, do not remove the foam block until the washer is at the final location. 5. Make sure the holes on the pedestal washer align with the holes in the front-loading washer, then install 4 long screws (included in box) at each corner to securely attach the front-loading washer to the pedestal washer. Long screws 6. E xtend the legs of the front-loading washer slightly until it is snugged up against the pedestal washer. 3. Turn the top cover about 180 degrees. Cover the upper hole with the top cover and install 4 short screws (included in packing box) to fix it in place. Short screws Top cover TOOLS YOU WILL NEED yy Adjustable Pliers • Carpenter's Level yy Screwdriver WARNING yy The top cover must be installed to avoid the risk of electric shock or short circuit. Failure to do so can cause serious injury, fire, electric shock or death.