LG WM1333HW Owners Manual - Page 9

Level adjustment

Get LG WM1333HW PDF manuals and user guides View all LG WM1333HW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

• Level adjustment _her Adjustable feet _

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
•
Level adjustment
_her
_<_er
Adjustable
feet
Adjustable/eel
1. Adjusting the washing machine level properly prevents excessive
noise and vibration.
Install the appliance on a solid and level floor surface, preferably in a
corner of the room.
Timber or suspended type flooring may contribute to
excessivevibration and unbalanceerrors.
2.
If the floor is uneven, adjust the adjustable feet as required.
(Do not insert pieces of wood etc. under the feet)
Make sure that all four feet are stable and resting on the floor and
then check that the appliance is perfectly level. (Use a spirit level)
_4
After the washer is level, tighten the lock
nuts up
towards of the base of
the washer. All lock nuts must be tightened.
":!_
Diagonal
Cheek
$TrTten
pushing
down
the edges
of the washing
maehine
top plate
diagonally,
the machine
should
not
move
up
and down
at all.
(Check
in both
directions)
If the
machine
l_eks
when pushing
the
machine
top plate
diagonally,
adjust
the J_,et again.
•
Concrete
floors
• The installation surface must be clean, dry and level.
• Install washer on a flat hard floor.
=' Tile floors
(Slippery
floors)
• Position each foot on the Tread Mat and level the machine to suit (Cut the Tread
Mat into 2 3/4 inch
squares and stick the pieces to the dry tile where machine is to be placed).
Tread Mat is a
self
adhesive material
used
on
ladders &
step_'
to prevent
slipping.
•
Wooden
floors
Rubber
Cup
. Wooden floors are particularly
susceptible to vibration.
o To prevent vibration we recommend you place rubber cups under each foot,
_
/
at least 15mm thick under the washer, secured to at least 2 floor beams with screws.
o If possible install the washer in one of the corners of the room, where the floor is more stable.
Insert
the rubber
eups
to reduce
vibration.
You ean
obtain
the rubbee
cups
&/no.4620ER4002B)
.fi'om
the LG poa'ts dept.
. Proper placement and levelling of the washer ensure long,regular and reliable operation.
. The washer must be absolutely
horizontal and stand firmly in position.
. It must not move when any corner is pressed.
* The installation surface must be clean, free from floor wax and other lubricant coatings.
. Do not let the feet of the washer get wet. If the washer feet get wet, slipping may occur.