Lenovo 8910ARU User Manual - Page 27
Notes, If the card is held in place by a retaining latch, press the card retaining latch
View all Lenovo 8910ARU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
To install or replace a PCI card: 1. Open the computer cover. See "Opening the computer cover" on page 14. 2. Rotate the card retainer to the open position. If you are installing a PCI card, remove the appropriate slot cover. If you are replacing an old PCI card, remove the old card that is currently installed. Figure 10. Removing a PCI card Notes: a. The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small amount until it is removed from the card slot. b. If the card is held in place by a retaining latch, press the card retaining latch 1 as shown to disengage the latch. Grasp the card and gently pull it out of the slot. 3. Remove the new PCI card from its static-protective package. Chapter 2. Installing options and replacing hardware 19