Lenovo 8910ARU User Manual - Page 34
Important, Go to Completing the parts replacement
View all Lenovo 8910ARU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
7. To install a new hard disk drive into the bracket, flex the bracket and align pin 1 , pin 2 , pin 3 , and pin 4 on the bracket with the holes in the hard disk drive. Figure 17. Installing the hard disk drive bracket Important: Do not touch the circuit board on the bottom of the hard disk drive. 8. Connect the signal cable and the power cable to the new hard disk drive. 9. Install the new hard disk drive and bracket into the hard disk drive retainer and rotate down until the two clips on the blue handle of the hard disk drive bracket snap into position. 10. Go to "Completing the parts replacement" on page 36. 26 User Guide
7.
To install a new hard disk drive into the bracket, flex the bracket and align
pin
±1²
, pin
±2²
, pin
±3²
, and pin
±4²
on the bracket with the holes in the
hard disk drive.
Important:
Do not touch the circuit board on the bottom of the hard disk
drive.
8.
Connect the signal cable and the power cable to the new hard disk drive.
9.
Install the new hard disk drive and bracket into the hard disk drive retainer
and rotate down until the two clips on the blue handle of the hard disk drive
bracket snap into position.
10.
Go to “Completing the parts replacement” on page 36.
Figure 17. Installing the hard disk drive bracket
26
User Guide