Lenovo IdeaPad V360 Lenovo IdeaPad V360 Hardware Maintenance Manual V2.0 - Page 44

PCI Express Mini Card for wireless LAN/WAN, Screw quantity, Color, Torque

Page 44 highlights

IdeaPad V360 Hardware Maintenance Manual 1060 PCI Express Mini Card for wireless LAN/WAN For access, remove these FRUs in order: •• "1010 Battery pack" on page 34 •• "1030 Hard disk drive(HDD)/Mini PCI Express Card slot compartment cover" on page 36 Figure 6. Removal steps of PCI Express Mini Card for wireless LAN/WAN 2 2 1 1 Disconnect two wireless LAN cables (black, white) and two wireless WAN cables (red, blue) in the direction shown by arrows 1, and then remove the screws 2. In step 1, unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159), or pick up the connectors with your fingers and gently unplug them in the direction shown by arrows. Notes: wireless LAN card has 2 cables in step 1. wireless LAN card in some models may have 3 cables in step 1. wireless WAN card has 2 cables in step 1. Step 2 Screw (quantity) M2 × 3.5 mm, flat-head, nylok-coated (2) Color Black Torque 1.6 kgfcm 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87

40
IdeaPad V360 Hardware Maintenance Manual
1060 PCI Express Mini Card for wireless LAN/WAN
For access, remove these FRUs in order:
“1010 Battery pack” on page 34
“1030 Hard disk drive(HDD)/Mini PCI Express Card slot compartment cover”
on page 36
Figure 6. Removal steps of PCI Express Mini Card for wireless LAN/WAN
2
2
1
1
Disconnect two wireless LAN cables (black, white) and two wireless WAN
cables (red, blue) in the direction shown by arrows
1
, and then remove the
screws
2
.
In step
1
, unplug the jacks by using the removal tool antenna RF connector
(P/N: 08K7159), or pick up the connectors with your fingers and gently unplug
them in the direction shown by arrows.
Notes:
wireless LAN card has 2 cables in step
1
.
wireless LAN card in some models may have 3 cables in step
1
.
wireless WAN card has 2 cables in step
1
.
Step
Screw (quantity)
Color
Torque
2
M2 × 3.5 mm, flat-head, nylok-coated (2)
Black
1.6 kgfcm