Lenovo IdeaPad V360 Lenovo IdeaPad V360 Hardware Maintenance Manual V2.0 - Page 60

LCD unit, 1090 System board

Page 60 highlights

IdeaPad V360 Hardware Maintenance Manual 1120 LCD unit For access, remove these FRUs in order: •• "1010 Battery pack" on page 34 •• "1020 Dummy card" on page 35 •• "1030 Hard disk drive(HDD)/Mini PCI Express Card slot compartment cover" on page 36 •• "1040 Hard disk drive" on page 37 •• "1050 DIMM compartment cover and DIMM" on page 38 •• "1060 PCI Express Mini Card for wireless LAN/WAN" on page 40 •• "1070 Keyboard" on page 42 •• "1080 Keyboard bezel" on page 44 •• "1090 System board" on page 48 Figure 12. Removal steps of LCD unit Release the antenna cables from the cable guides in the direction shown by arrows 1. Remove four screws 2. 22 1 1 22 1 Step 2 Screw (quantity) M2.5 × 6 mm, flat-head, nylok-coated (4) Color White Torque 3.0 kgfcm When installing: Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87

56
IdeaPad V360 Hardware Maintenance Manual
1120 LCD unit
For access, remove these FRUs in order:
“1010 Battery pack” on page 34
“1020 Dummy card” on page 35
“1030 Hard disk drive(HDD)/Mini PCI Express Card slot compartment cover”
on page 36
“1040 Hard disk drive” on page 37
“1050 DIMM compartment cover and DIMM” on page 38
“1060 PCI Express Mini Card for wireless LAN/WAN” on page 40
“1070 Keyboard” on page 42
“1080 Keyboard bezel” on page 44
“1090 System board” on page 48
Figure 12. Removal steps of
LCD unit
Release the antenna cables from the cable guides in the direction shown by
arrows
1
. Remove four screws
2
.
1
1
1
2
2
2
2
Step
Screw (quantity)
Color
Torque
2
M2
.5
×
6 mm, flat-head, nylok-coated (4)
White
3.0 kgfcm
When installing:
Route the antenna cables along the cable guides. As you
route the cables, make sure that they are not subjected to any tension. Tension
could cause the cables to be damaged by the cable guides, or a wire to be
broken.