Lenovo N500 User Guide - Page 33
To Set a Supervisor Password - bios access
UPC - 884343605043
View all Lenovo N500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Lenovo 3000 N500 UG V1.0_en.book Page 25 Monday, September 1, 2008 9:44 AM Chapter 2. Using Your Computer Hard disk drive (HDD) password Once an HDD password is set, you will need to enter it in order to access the hard disk. You can set the HDD password with Set HDD user password in Security. To Set a Supervisor Password: Only a system administrator will be able to perform this procedure. 1 Turn on your computer. Press F2, while the initial screen is displayed. The BIOS Setup Utility screen opens. 2 Select Security, using the cursor directional keys. 3 Select Set Supervisor Password, and press the Enter key. The Set Supervisor Password window opens. 4 Choose your Supervisor password, which can be from one to eight alphanumeric characters in any combination. Type it in the Enter New Password field. 5 Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. 6 Commit your password to memory, and press the Enter key. 7 Press F10 to exit. 8 Select Yes in the Setup Confirmation window. 25