Lenovo N500 User Guide - Page 36
Changing or Removing the User Password
UPC - 884343605043
View all Lenovo N500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Lenovo 3000 N500 UG V1.0_en.book Page 28 Monday, September 1, 2008 9:44 AM Chapter 2. Using Your Computer Changing or Removing the User Password To change the password, do the following: 1 Select Set User Password, and press the Enter key. The Set User Password window opens. 2 Choose your user password, which can be from one to eight alphanumeric characters in any combination. Type the correct password in the Enter Current Password field. Press Enter key once to move to the Enter New Password field, then type in a new user password in. 3 Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. 4 Commit your password to memory, and press the Enter key. To remove the password, do the following: 1 Select Set User Password, and press the Enter key. 2 Type the correct user password in Enter Current Password, and finally press the Enter key thrice. Note: Make sure Password on boot is set to Enabled if you desire password protection at power on. 28