Lenovo ThinkCentre M58 Hardware Maintenance Manual - Page 54
Flash the system. See Updating flashing BIOS, Diagnostic Error Code - review
View all Lenovo ThinkCentre M58 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Diagnostic Error Code 000-000-XXX BIOS Test Passed 000-002-XXX BIOS Timeout 000-024-XXX BIOS Addressing test failure 000-025-XXX BIOS Checksum Value error 000-026-XXX FLASH data error 000-027-XXX BIOS Configuration/Setup error 000-034-XXX BIOS Buffer Allocation failure 000-035-XXX BIOS Reset Condition detected 000-036-XXX BIOS Register error 000-038-XXX BIOS Extension failure 000-039-XXX BIOS DMI data error 000-195-XXX BIOS Test aborted by user 000-196-XXX BIOS test halt, error threshold exceeded 000-197-XXX BIOS test warning FRU/Action No action 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 276 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 276 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 276 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 276 2. System board 1. Run Setup 2. Flash the system. See "Updating (flashing) BIOS from a disc" on page 276 3. System board 1. Reboot the system 2. Flash the system. See "Updating (flashing) BIOS from a disc" on page 276 3. Run memory test 4. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 276 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 276 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 276 2. Adapter card 3. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 276 2. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 43 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 48 ThinkCentre Hardware Maintenance Manual