Lenovo ThinkCentre M58 Hardware Maintenance Manual - Page 64
X-XXX 071-01X-XXX 071-02X-XXX, Game Port interface Test Passed
View all Lenovo ThinkCentre M58 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Diagnostic Error Code 071-00X-XXX 071-01X-XXX 071-02X-XXXAudio port error 071-03X-XXX Audio port failure 071-04X-XXX Audio port failure 071-195-XXX Audio port Test aborted by user 071-196-XXX Audio port test halt, error threshold exceeded 071-197-XXX Audio port test warning 071-198-XXX Audio port test aborted 071-199-XXX Audio port test failed, cause unknown 071-25X-XXX Audio port failure 080-000-XXX Game Port interface Test Passed 080-XXX-XXX Game Port interface Error 080-195-XXX Game Port interface Test aborted by user 080-196-XXX Game Port interface test halt, error threshold exceeded FRU/Action 1. Run Setup 2. Flash the system. See "Updating (flashing) BIOS from a disc" on page 276 3. System board 1. Speakers 2. Microphone 3. Audio card, if installed 4. System board 1. Run Setup 2. Audio card, if installed 3. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 43 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 43 2. Flash the system and re-test. See "Updating (flashing) BIOS from a disc" on page 276 3. Go to "Undetermined problems" on page 66 1. See "Undetermined problems" on page 66 2. Flash the system and re-test. See "Updating (flashing) BIOS from a disc" on page 276 3. Replace component under function test 1. Speakers 2. Audio card, if installed 3. System board No action 1. Remove the game port device and re-test the system Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 58 ThinkCentre Hardware Maintenance Manual