Lenovo ThinkPad 130 ThinkPad 130, 1200, 1300 - Hardware Maintenance Manual (Oc - Page 37
Removing the power-on/setup password, System, Security, Enter, Power-on/Setup Password
View all Lenovo ThinkPad 130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
If power-on or setup password is forgotten, change Bit 4 of switch SW1 from 1 to 0 to bypass the password. Removing the power-on/setup password If the customer forgets the power-on or setup password, set the switch SW1, Bit 4 from 1 to 0 firstly to bypass the two passwords. Then do the followings to remove the two passwords: 1. Power on the computer and press F1 to enter the BIOS Utility menu. 2. The main screen displays as below: BIOS Utility System Information Basic System Settings Startup Configuration Onboard Devices Configuration System Security Load Default Settings ↑↓ = Move highlight bar, ↵ = Select, Esc = Exit 3. Using the up or down arrow key, select System Security. 4. Press the Enter key. The password selection window appears: System Security Setup Password None ] Power-on Password None ] Hard Disk Password None ] Page 1/1 ↑↓ = Move highlight bar, ←→ = Change setting, F1 = Help 5. Move the highlight bar to Power-on/Setup Password. 6. Select None. 7. Save the change, and exit the BIOS Utility menu. The other way to remove the power-on or setup password: ThinkPad i Series 1200/1300 27