Lenovo ThinkPad 130 ThinkPad 130, 1200, 1300 - Hardware Maintenance Manual (Oc - Page 50
Symptom-to-FRU Index, Numeric Error Codes and Messages
View all Lenovo ThinkPad 130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Symptom-to-FRU Index The Symptom-to-FRU Index lists the symptoms and errors and the possible causes. The most likely cause is listed first. Note: Perform the FRU replacement or actions in the sequence shown in the FRU/Action columns. If a FRU does not solve the problem, put the original part back in the computer. Do not replace a non-defective FRU. This index can also be used to help you decide which FRUs should be available when servicing a computer. Numeric error codes show the errors detected in POST or system operation (runtime). In the following error codes, X can be any number. If no codes are available, use narrative symptoms. If the symptom, is not listed, go to "Undetermined Problems" on page 47. Note: For any IBM device not supported by the diagnostic codes in this ThinkPad computer, see the manual for that device. Numeric Error Codes and Messages Error Code Message 006 Equipment Configuration Error 040 Diskette Drive Controller Error 070 Real Time Clock Error FRU/Action in Sequence Enter BIOS Utility and execute ″Load Setup Default Settings″; then reboot the system. v Go to "FRU tests" on page 98. v Diskette drive connection v Diskette drive v System board v Reset Time in the Basic System Settings of BIOS Utility. v Backup battery (RTC battery) v Enter BIOS Utility and execute ″Load Setup Default Settings″; then reboot the system. v System board 40 ThinkPad i Series 1200/1300 HMM