Lenovo ThinkPad 380D User's Guide for TP 380XD, TP 385XD - Page 91
Open the PC Card Properties window., Memory Card Utility, Volume Label, Format Drive/Partition
View all Lenovo ThinkPad 380D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Using CardWorks Change card driver: If this item is enabled (checked), you can select either Plug and Play (if available) or the CardWorks device drivers. Remove from the Plug and Play hardware list: If this item is enabled (checked), you can delete the Plug and Play device driver assigned to a card. This applies only if the card is handled by Windows 95 (Plug and Play mode). Later, when you reinsert the same PC Card, CardWorks configures the card as if it were the first insertion. Memory Card Utility: This item appears only if you insert an SRAM card or a Flash memory card. You can format the SRAM card or Flash memory card as follows: Note: You can also format these card from the file system with the DOS FORMAT command. 1. Open the "PC Card Properties" window. 2. Select Memory Card Utility tab. 3. Enter a Volume Label (if desired). 4. Click on Format Drive/Partition. 5. Click on Start. This procedure enables you to completely erase a SRAM/Flash memory card, especially a brand-new card. Make sure to save the data on the card before erasing it. Chapter 2. Operating Your Computer 71