Lenovo ThinkPad 600E Technical Reference Manual for the ThinkPad 600 - Page 21
Output Protection, Voltage Sequencing, Power Supply Connector, Refer
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Output Protection A short circuit placed on any dc output (between two outputs or between an output and a dc return) latches all dc outputs into a shutdown state, with no hazardous condition to the power supply. If an overvoltage fault occurs in the power supply, the power supply latches all dc outputs into a shutdown state before any output exceeds 135% of the nominal value of the power supply. Voltage Sequencing When power is turned on, the output voltages reach their operational voltages within 2 seconds. Power Supply Connector The following connector is used with the AC Adapter. The total power capacity of this connector must not exceed 4.0 A. Refer to Figure 1-9 for the appropriate adapter pin assignments. Pin Voltage 1 +7.0 V dc to +17.0 V dc (depending on charging conditions) 2 Ground Figure 1-9. Voltage Pin Assignments for the 56W AC Adapter System Overview 1-11