Lenovo ThinkPad 770 Hardware Maintenance Manual for 770 series notebooks(Janua - Page 59
Installed Devices List on, PerformChecking - error 174
View all Lenovo ThinkPad 770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
SYMPTOM-TO-FRU INDEX Symptom / Error 110 (Planar parity.) 111 (I/O parity.) 11XX 1101: Serial_A test failure. 12XX 1201: Serial_B test failure. 158 (The hard disk password was not set even though the supervisor password is set.) 159 (The hard disk password is not set the same as the supervisor password.) 161 (Dead battery.) 163 (Time and date were not set.) 173 (Configuration data was lost.) 174 (Configuration error: Perform"Checking the Installed Devices List" on page 43 before changing any FRUs.) 175, 177, 178 175: EEPROM CRC #1 error. 177: Supervisor password check sum error. 178: EEPROM is not functional. FRU / Action in Sequence 1. Go to "Memory Checkout" on page 33. 2. DIMM card 3. Detach the expansion unit if it is attached to the computer. 4. System board 1. Go to "Memory Checkout" on page 33. 2. Expansion unit or port replicator 3. System board 1. Serial device 2. Communication cable 3. System board 1. System board (infrared) Set the password for the hard disk drive. Set the correct password for the hard disk drive. 1. Go to "Checking the Backup Battery" on page 38. 2. Backup battery 3. System board 1. Set time and date. 2. System board 1. Select OK in the error screen; then set the time and date. 2. Backup battery 3. System board 1. Check device configuration. 2. Hard disk drive assembly 3. System board 1. System board ThinkPad 770, 770E, 770X and 770Z 53