Lenovo ThinkPad 770 Hardware Maintenance Manual for 770 series notebooks(Janua - Page 63
Beep Symptoms, No Beep Symptoms
View all Lenovo ThinkPad 770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
SYMPTOM-TO-FRU INDEX Beep Symptoms Symptom / Error Continuous beeps. One beep and a blank, unreadable, or flashing LCD. One beep, and the message "Unable to access boot source." One long and two short beeps, and a blank or unreadable LCD. One long beep followed by four short beeps each time the power switch is operated. (System cannot power on due to low battery voltage.) One beep every second. (System is shutting down due to low battery voltage.) Two short beeps with error codes. Two short beeps with blank screen. FRU / Action in Sequence 1. Reseat the CPU card. 2. Reseat the video card. 3. System board 1. Reseat the LCD connector. 2. Reseat the CPU card. 3. LCD assembly 4. System board 5. CPU card 1. Boot device 2. System board 1. Reseat the video card. 2. Reseat the CPU card. 3. Video card 4. System board 5. LCD assembly Connect the AC Adapter or install a fully charged battery. Connect the AC Adapter or install a fully charged battery. (Allow the system to completely shut down before changing the battery.) POST error. See "Numeric Error Codes" on page 52. 1. System board No Beep Symptoms Symptom / Error FRU / Action in Sequence No beep, power-on indicator not on, and a blank LCD during POST. 1. Go to "Power Systems Checkout" on page 36. 2. System board 3. Check the power outlet. No beep, power-on indicator on, and a blank LCD during POST. 1. Reseat the CPU card. 2. System board No beep, power-on indicator on, and a blinking cursor only during POST. 1. System board ThinkPad 770, 770E, 770X and 770Z 57