Lenovo ThinkPad X1 Hardware Maintenance Manual - Page 65
Hard disk drive and solid state drive, Before removing the drive
View all Lenovo ThinkPad X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
4. Select Disable Built-in Battery. 5. Follow the instructions on the screen. Then the battery pack is disabled in the UEFI BIOS. When ac power is reconnected, the battery pack will be automatically enabled. 1010 Hard disk drive and solid state drive For access, disable the battery pack first. Refer to "1000 Disabling the battery pack in the UEFI BIOS" on page 58 for detailed instructions. Attention: • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • Before removing the drive, have the user make a backup copy of all the information on it if possible. • Never remove the drive while the system is operating or is in suspend mode. Removal steps of hard disk drive and solid state drive Note: Loosen the screw 1 , but do not remove it. 1 Step 1 Screw (quantity) M2 x 8 mm (1) 2 Color Black Torque 0.181 Nm (1.85 kgfcm) Chapter 8. Removing and replacing a FRU 59