Lenovo ThinkPad X1 Hardware Maintenance Manual - Page 86
System board and base cover assembly, When installing
View all Lenovo ThinkPad X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
5 4 6 Step 4 Screw (quantity) Color M2 x 3 mm (1) Black When installing: Make sure that the connector 5 is attached firmly. Torque 0.181 Nm (1.85 kgfcm) 1160 System board and base cover assembly Important notices for handling the system board: When handling the system board, bear the following in mind. • The system board has an accelerometer, which can be broken by applying several thousands of G-forces. Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench can subject the accelerometer to as much as 6,000 G's of shock. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. • If a system board is dropped, test it using PC-Doctor for DOS if the system supports PC-Doctor for DOS, to make sure that the Active Protection System™ is still functioning. 80 Hardware Maintenance Manual