Lenovo ThinkPad X1 Hardware Maintenance Manual - Page 78
Then remove these FRUs in order, same for a palm rest with or without a fingerprint reader.
View all Lenovo ThinkPad X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Then remove these FRUs in order: • "1010 Hard disk drive and solid state drive" on page 59 • "1020 Keyboard" on page 61 Note: In models with the fingerprint reader, the sensor is attached to the palm rest FRU. If the fingerprint reader has any defects, you can replace it by following the procedures given in this section, which are the same for a palm rest with or without a fingerprint reader. Removal steps of keyboard bezel with fingerprint reader 22 1 1 1 1 1 2 1 1 Step 1 2 Screw (quantity) M2 x 5 mm (7) M2 x 3 mm (3) Color Black Black Torque 0.181 Nm (1.85 kgfcm) 0.181 Nm (1.85 kgfcm) 3 3 Step 3 Screw (quantity) M2 x 3 mm (2) 72 Hardware Maintenance Manual Color Black Torque 0.181 Nm (1.85 kgfcm)
Then remove these FRUs in order:
•
“1010 Hard disk drive and solid state drive” on page 59
•
“1020 Keyboard” on page 61
Note:
In models with the fingerprint reader, the sensor is attached to the palm rest FRU. If the fingerprint
reader has any defects, you can replace it by following the procedures given in this section, which are the
same for a palm rest with or without a fingerprint reader.
Removal steps of keyboard bezel with fingerprint reader
2
2
2
1
1
1
1
1
1
1
Step
Screw (quantity)
Color
Torque
1
M2 x 5 mm (7)
Black
0.181 Nm
(1.85 kgfcm)
2
M2 x 3 mm (3)
Black
0.181 Nm
(1.85 kgfcm)
3
3
Step
Screw (quantity)
Color
Torque
3
M2 x 3 mm (2)
Black
0.181 Nm
(1.85 kgfcm)
72
Hardware Maintenance Manual