Lenovo ThinkPad X30 English - Setup Guide for ThinkPad X30 - Page 6
If the SO-DIMM is already in the memory slot, remove it to make room for the new, then press it
 |
View all Lenovo ThinkPad X30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
If the SO-DIMM is already in the memory slot, remove it to make room for the new one by pressing out on the latches on both edges of the socket at the same time. Be sure to save it for future use. 5. Find the notch on the side of the SO-DIMM you are installing. Attention: To avoid damaging the SO-DIMM, do not touch its contact edge. 6. With the notched end of the SO-DIMM toward the side of the socket, insert the SO-DIMM at an angle of about 20 degrees, into the socket 1 ; then press it in firmly 2 . 7. Pivot the SO-DIMM downward until it snaps into place. 8. Make sure that the SO-DIMM is firmly fixed in the slot and cannot be moved easily. 6
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
If the SO-DIMM is already in the memory slot, remove it to make room for the new
one by pressing out on the latches on both edges of the socket at the same time. Be
sure to save it for future use.
5.
Find the notch on the side of the SO-DIMM you are installing.
Attention:
To avoid damaging the SO-DIMM, do not touch its contact edge.
6.
With the notched end of the SO-DIMM toward the side of the socket, insert the
SO-DIMM at an angle of about 20 degrees, into the socket
±1²
; then press it in
firmly
±2²
.
7.
Pivot the SO-DIMM downward until it snaps into place.
8.
Make sure that the SO-DIMM is firmly fixed in the slot and cannot be moved easily.
6