Lexmark 12N0009 Quick Reference Guide - Page 8

Understanding printer messages The following table lists some typical operator panel messages you may encounter and the action you can take to clear them. For more information on these or other printer messages, refer to the Lexmark C910 Publications CD. Message Action 37 Insufficient Memory The printer memory isn't sufficient and cannot continue processing print jobs. • Press Go to clear the message. The printer deletes held jobs until there is enough printer memory to process the current job. • Press Stop to clear the message without deleting any held jobs. The current job may not print correctly. • Press Menu to open the Job Menu, and then press Select to cancel the current job. Note: The messages 37 Insufficient Memory and Held Jobs may be lost alternate on the display. 38 Memory Full The printer is processing data, but the memory used to store pages is full. • Press Go to clear the message and continue printing the job. The job may not print correctly. • Press Menu to open the Job Menu, and then press Select to cancel the current job. 39 Complex Page The page may not print correctly because the print information on the page is too complex. • Press Go to clear the message and continue printing the job. The job may not print correctly. • Press Menu to open the Job Menu, and then press Select to cancel the current job. 80 Fuser Exhausted It is time for you to replace the fuser. • Press Go to clear the message. • Install a new fuser. Note: If the front door is opened and closed, the message Did you replace fuser? appears. If a new fuser has not been installed, press Stop. If a new fuser has been installed, press Go. 6