Lexmark 21Z0294 Technical Reference - Page 113
If AUTO is sent, both PS SmartSwitch and PCL, Power Saver mode when POWERSAVE is On.
UPC - 734646313247
View all Lexmark 21Z0294 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
3-17 PJL Table 3-3: Common Variables for Both Printer Languages (Continued) Variable PASSWORD (DEFAULT only) PERSONALITY (Port specific) POWERSAVE (DEFAULT only) POWERSAVETIME (DEFAULT only) Function Default password for PJL NVRAM security SmartSwitch settings Power Save feature Power Save time, in minutes Selections Factory Default 0 to 65535 0 Locks the printer control panel to keep the user defaults from changing. See your printer documentation for more information. The Default PJL password is 0. If the PJL password is not equal to 0, a DINQUIRE or INQUIRE on the PASSWORD variable returns ENABLED. If the PJL password is equal to 0, a DINQUIRE or INQUIRE on the PASSWORD variable returns DISABLED. See the PASSWORD parameter of the JOB command on page 3-5 for more information. PCL, POSTSCRIPT, AUTO AUTO PERSONALITY controls the SmartSwitch settings for the interface link on which the PJL command is received. If AUTO is sent, both PS SmartSwitch and PCL Smartswitch menu settings are set to ON. If PCL is sent, PS SmartSwitch is set to OFF and PCL SmartSwitch is set to ON. If POSTSCRIPT is sent, PCL SmartSwitch is set to OFF and PS SmartSwitch is set to ON. When queried, AUTO is returned if both SmartSwitch settings are ON. If one SmartSwitch setting is OFF, the printer language whose SmartSwitch setting is ON is returned. If both SmartSwitch settings are OFF, the default printer language is returned. ON, OFF ON ON enables the power-saving feature. OFF disables the power-saving feature. Note: Some printer models released in the year 2000 or later designated as Energy Star printers cannot have Power Saver disabled. 0 to 120 (Model specific) 20 0 to 240 (Model specific) (0 indicates the Power Saver Time feature is disabled.) The time the printer remains idle before it enters Power Saver mode when POWERSAVE is On. Note: If a value greater than 120 or 240 is specified by a SET or DEFAULT command, the value is changed to 120 or 240 based on the printer model.