Lexmark 44J0000 User's Guide - Page 57
Cleaning the printheads
UPC - 734646207737
View all Lexmark 44J0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
19 Cleaning the printheads If streaking or print quality problems occur, first check that the printheads are positioned correctly in the carrier: 1 Press Menu> until you see the Utilities Menu. 2 Press Select. 3 Press Menu> until you see Change Printhead. 4 Press Select. 5 Open the printer cover. The carrier moves to the load position at the center of the printer. 6 Raise the carrier handle up and back down to reseat the printheads. 7 Close the cover. If this does not solve the problem, a printhead may be plugged with dried ink. Doing a Short Clean should fix most print quality problems: 1 Press Menu> until the Utilities Menu appears. 2 Press Select. 3 Press Menu> until Clean Printheads appears on the second line of the display. 4 Press Select. Short Clean appears on the second line of the display. 5 Press Select. Once the Short Clean finishes, a test page prints four color bars. If you do not see an improvement, do a Long Clean. Keep in mind, however, that a Long Clean uses a substantial amount of ink and takes some time to run. 1 Press Menu> until the Utilities Menu appears. 2 Press Select. 3 Press Menu> until Clean Printheads appears on the second line of the display. 4 Press Select. 5 Press Menu> until Long Clean appears on the second line of the display. 6 Press Select. 48