Lexmark 4600 C77x - Menus and Messages Guide - Page 35
Standard Network or Network <x>, Setup, Setup Menu
View all Lexmark 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Using the MFP menus Standard Network or Network Use these menu items to change printer settings affecting jobs sent to the MFP through a network port, either Standard Network or Network , where x represents 1 or 2. Menu item PCL SmartSwitch PS SmartSwitch NPA Mode Network Buffer Job Buffering Purpose Values and descriptions Configures the MFP so it On* automatically switches to PCL emulation when a print job received through the network port requires it, regardless of the default printer language. Off The MFP examines data on the network interface and selects PCL emulation if the data indicates that is the required printer language. The MFP does not examine the incoming data. The printer uses PostScript emulation to process the job if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS SmartSwitch is Off. Configures the MFP so it On* automatically switches to PostScript emulation when a print job received through the network port requires it, regardless of the default printer language. Off The MFP examines data on the network interface connection and selects PostScript emulation if the data indicates that is the required printer language. The MFP does not examine the incoming data. The printer uses PCL emulation to process the job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PCL SmartSwitch is Off. Specifies whether the MFP performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol. Note: Changing this menu item automatically resets the MFP. Off Auto* The MFP does not perform NPA processing. The MFP examines the data to determine the format and then processes it appropriately. Configures the size of the network input buffer. Note: Changing the Network Buffer menu item automatically resets the MFP. Any permanent resources, such as fonts or macros, are lost. Auto* 3K to maximum size allowed (1K increments) The MFP automatically calculates the Network Buffer size (recommended setting). User specifies the Network Buffer size. The maximum size depends on the amount of memory in the MFP, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the Network Buffer size, disable or reduce the size of the parallel, serial, and USB buffers. Temporarily stores jobs on the MFP hard disk before printing. This menu item only appears when a nondefective formatted hard disk is installed. Note: Changing this menu item automatically resets the MFP. Off* On Auto Does not buffer jobs to the hard disk. Buffers print jobs to the hard disk. Buffers print jobs only if the MFP is busy processing data from another input port. Network/Ports 35