Lexmark 502n User's Guide - Page 92
PBX Access Digit, Notes, Default Mode, Auto Clear, Power Saver, Display Language, Country Code
UPC - 734646054515
View all Lexmark 502n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Menu item PBX Access Digit xxx Default Mode Copy Fax Auto Clear Off On 30 sec 1 min. 2 min. 3 min. 5 min. 10 min. Power Saver Off On Wait 1-240min Display Language ENGLISH FRENCH GERMAN ITALIAN SPANISH Country Code Description Specifies an outside line dispatch number Notes: • 9 is the factory default setting. • Any number from 1-999 can be used. Specifies whether the printer will be in Fax mode or Copy mode following either of these two events: • The printer is turned on. • The Auto Clear setting times out. Note: Copy is the factory default setting. Sets whether the printer automatically returns to the Default Mode setting after the set amount of time if no operation is done during that time Notes: • On (30 sec) is the factory default setting. • Off disables the Auto Clear function. Sets the amount of time in minutes the printer waits after a job is printed before it goes into a reduced power state Notes: • On (30 min.) is the factory default setting. • Lower settings conserve more energy, but may require longer warm-up times. • Select the lowest setting if the printer shares an electrical circuit with room lighting or you notice lights flickering in the room. • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm-up time. Selects the language of the text appearing on the display Sets the country or region where the printer is being used Note: The Country Code must be set correctly for the fax function to work properly. 92