Lexmark Impact S301 User's Guide - Page 102
Partial copies or scans of documents or photos, Scan was not successful, Browse Devices, Notes
View all Lexmark Impact S301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Partial copies or scans of documents or photos If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: MAKE SURE THE DOCUMENT OR PHOTO IS LOADED FACEDOWN ON THE SCANNER GLASS AND IN THE CORRECT CORNER SELECT A PAPER SIZE FROM THE PRINTER SOFTWARE THAT MATCHES THE LOADED PAPER MAKE SURE THE ORIGINAL SIZE SETTING MATCHES THE SIZE OF THE DOCUMENT YOU ARE SCANNING Scan was not successful If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: CHECK THE USB CONNECTION 1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one. 2 Firmly plug the square end of the USB cable into the back of the printer. 3 Firmly plug the rectangular end of the USB cable into the USB port of the computer. The USB port is marked with . Note: If you continue to have problems, then try another USB port on the computer. You may have connected to a defective port. RESTART THE COMPUTER ADD NETWORK PRINTERS THROUGH THE EDIT DEVICE LIST DIALOG If you are scanning from a network printer, then add that printer using the Edit Device List dialog. For more information, see the Edit Device List Help: 1 With the Scan Center application open, choose Browse Devices from the Device pop-up menu. 2 Click ? from the Edit Device List dialog that appears. MAKE SURE "ENABLE NETWORK SCAN TO COMPUTER" IS SELECTED IN THE GENERAL TAB OF THE SCAN CENTER (MACINTOSH ONLY) Notes: • This is available only in Mac OS X version 10.6. • If you have several applications open, then make sure that the Scan Center is the active application. Otherwise, the correct menu bar does not appear. From the menu bar, navigate to: Scan Center > Preferences > General tab Troubleshooting 102