Lexmark MX317 User Guide - Page 108
Wireless menu, Network/Ports, Standard Network, Wireless, Network [x], Network [x] Setup
View all Lexmark MX317 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Understanding the printer menus 108 Use Auto Configuration On Off Set Hostname View Address View Router Address Enable DHCPv6 On Off To Specify whether or not the network adapter accepts the automatic IPv6 address configuration entries provided by a router. Note: On is the factory default setting. Set the host name. Note: These settings can be changed only from the Embedded Web Server. Enable DHCPv6 in the printer. Note: On is the factory default setting. Wireless menu Note: This menu is available only in printers connected to an Ethernet network and printers with a wireless network adapter attached. To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Wireless • Network/Ports > Network [x] > Network [x] Setup > Wireless Use Wi‑Fi Protected Setup (WPS) Start Push Button Method Start PIN Method Enable/Disable WPS Auto‑detection Enable Disable Network Mode BSS Type Infrastructure Ad hoc Compatibility 802.11b/g 802.11b/g/n Choose Network To Establish a wireless network connection and enable network security. Notes: • Start Push Button Method connects the printer to a wireless network when buttons on both the printer and the access point (wireless router) are pressed within a given period of time. • Start PIN Method connects the printer to a wireless network when a PIN on the printer is entered into the wireless settings of the access point. Automatically detect the connection method that an access point with WPS uses-Start Push Button Method or Start PIN Method. Note: Disable is the factory default setting. Specify the network mode. Notes: • Infrastructure is the factory default setting. This lets the printer access a network using an access point. • Ad hoc configures a wireless connection directly between the printer and a computer. Specify the wireless standard for the wireless network. Note: The 802.11b/g/n is the factory default setting. Select an available network for the printer to use.