Lexmark MX317 User Guide - Page 178
Close flatbed cover and load originals if restarting job [2yy.xx], Close front door, Complex
View all Lexmark MX317 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Troubleshooting 178 Close flatbed cover and load originals if restarting job [2yy.xx] From the printer control panel, try one or more of the following: • Select Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job. • Select Scan from flatbed to continue scanning from the scanner glass immediately after the last successful scan job. • Select Finish job without further scanning to end the last successful scan job. Note: This does not cancel the scan job. All successfully scanned pages will be processed further for copying, faxing, or e-mailing. • Select Cancel job to clear the message and cancel the scan job. • For non‑touch‑screen printer models, press to confirm. Close front door Close the front door of the printer. Complex page, some data may not have printed [39] Try one or more of the following: • From the printer control panel, select Continue to ignore the message and continue printing. For non‑touch‑screen printer models, press to confirm. • Cancel the current print job. For non‑touch‑screen printer models, press • Install additional printer memory. to confirm. Configuration change, some held jobs were not restored [57] Held jobs are invalidated because of any of the following possible changes in the printer: • The printer firmware has been updated. • The tray for the print job is removed. • The print job is sent from a flash drive that is no longer attached to the USB port. • The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer model. From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm.