Lexmark MX722 Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 16

15 Step 3: Add the printer to the PSF STARTUP PROC Add printer to PSFSTARTUP PROC. Parameters to change are shown in bold. // PRT7 CNTL // PRT7 PRINTDEV FONTDD=*.FONT01, // OVLYDD=*.OLAY01, // PSEGDD=*.PSEG02, // PDEFDD=*.PDEF01, // FDEFDD=*.FDEF01, // JOBHDR=*.JOBHDR // JOBTRLR=*.JOBTLR // DSHDR=*.DSHDR, // FORMDEF=A10110, // PIMSG=(YES,16), // DATACK=UNBLOCK, // TRACE=NO, // MGMTMODE=OUTAVAIL, // CONNINTV=0, // DISCINTV=15, // TIMEOUT=REDRIVE, // FAILURE=WCONNECT, // IPADDR='157.184.67.102', // PORTNO=5001, // PRT7 ENDCNTL /* */ /* FONT */ /* OVERLAY */ /* SEGMENT */ /* PAGEDEF */ /* FORMDEF */ /* JOB HEADER */ /* JOB TRAILER */ /* DATA SET HEADER */ /* FORMDEF */ /* MESSAGES */ /* REPORT ALL DATA CHECKS */ /* INTERNAL TRACE */ /* PRINTER MANAGEMENT MODE */ /* NO TIMEOUT */ /* TIMEOUT=15 SECONDS */ /* PSF ACTION ON TIMEOUT */ /* ATTEMPT RECONNECT */ /* IP ADDRESS FOR PRINTER */ /* PORT ADDRESS FOR PRINTER */ /* */ The value (15) for DISCINTV specifies the time in seconds after which PSF ends the printer session when no output is available. The valid range is from 0 to 8160 seconds. The default value is 0. If DISCINTV=0, the PSF does not end the printer session when no output is available. Refer to "Printer and Host Timeout Values" for information on selecting the DISCINTV value. Example PSF STARTUP PROC - JCL and PRINTDEV. Example PSF STARTUP PROC // SAMPLE PROC // * // STEP01 EXEC PGM=APSPPIEP,REGION=4096K,TIME=1440 // STEPLIB DD DSN=PSF.LINKLIB,DISP=SHR // JOBHDR OUTPUT PAGEDEF=V06483, /* JOB HEADER */ // FORMDEF=A10110,CHARS=GT12 /* */ // JOBTLR OUTPUT PAGEDEF=V06483, /* JOB TRAILER */ // FORMDEF=A10110,CHARS=GT12 /* FORMDEF */ // MSGDS OUTPUT PAGEDEF=A08682 /* MESSAGE */ // FORMDEF=A10110,CHARS=GT15 /* */ //* */ // FONT01 DD DSN=SYS1.FONTLIB,DISP=SHR /* SYSTEM FONTS */ // DD DSN=INST.FONTLIB,DISP=SHR /* USER FONTS */ // * // PSEG02 DD DSN=INST.PSEGLIB,DISP=SHR /* PAGE SEGMENTS */ // *