Lexmark MX722 PRESCRIBE Emulation P43.4 Technical Reference - Page 18

Lexmark Confidential until announced PRESCRIBE commands 18 FRPO LE parameter 4 5 8 20 21 Paper source Tray 2 Tray 3 Multipurpose tray Tray 4 Tray 5 LF/LG: X and Y offsets for LE source These settings specify the X and Y offsets for shifting pages printed from the LE source. The offset is ignored if LE is set to 0. The offsets are designated in units of 1/300 of an inch. Negative values are allowed. For example, to set up an X offset of 1 inch and a Y offset of ‑0.5 inches for all pages that print from the multipurpose tray, use the following FRPO commands: !R! FRPO LE, 8; FRPO LF, 300; FRPO LG, ‑150; EXIT; GENF: GENerate Font The fonts generated by the PRESCRIBE emulation option with this command may differ in size and style from Kyocera. The font spacings of GENF fonts may also differ. If there are differences found with GENF fonts that are unacceptable, you can correct them by adjusting the GENF parameters. You can also change the application to use a resident scalable font instead. SEM: Set Emulation Mode Kyocera printers support a list of printer emulation modes in addition to PRESCRIBE as shown: The SEM command is used to temporarily switch the printer emulation mode. It also resets the margins and other parameters.