Lexmark MX722 PRESCRIBE Emulation P43.4 Technical Reference - Page 3

Lexmark Confidential until announced Overview 3 Overview The PRESCRIBE emulation option for Lexmark laser printers is an extended version of the firmware that includes a PRESCRIBE language processor. It enables the printer to replace printers in large accounts where the PRESCRIBE printer language is used. Kyocera does not offer a single standard version of PRESCRIBE across all its products. Therefore, the emulation compatibility of this version is based on testing with customer application test files and an extensive set of engineering command-level tests. This technical reference manual describes the capabilities of the PRESCRIBE emulation option and highlights the key limitations. Customers must consider these limitations in their certification testing. Supported printer models • LexmarkTM CS42x, CS52x, CS62x • Lexmark CS72x • Lexmark CS82x • Lexmark CS92x • Lexmark CX32x, CX42x, CX52x, CX62x • Lexmark CX72x • Lexmark CX820, CX825, CX827, CX860 • Lexmark CX92x • Lexmark MS52x, MS62x • Lexmark MS82x • Lexmark MX32x, MX42x, MX52x, MX62x • Lexmark MX72x, MX82x Installing the PRESCRIBE emulation option For information on installing the PRESCRIBE emulation option, see the installation instructions that came with the option, or see the printer User's Guide. Tips • Before installation, print a Menu Settings Page to help restore non‑default settings. To print a Menu Settings Page, from the printer control panel, touch Settings > Reports > Menu Settings Page. • To verify installation, print a Menu Settings Page. Under the Device Information section, check the entry for PRESCRIBE emulation option. For example, P-Scribe = P43. The second printed page is a PRESCRIBE emulation STAT page with the current FRPO permanent settings. • After installation, set up the PRESCRIBE FRPO (Firmware RePrOgram) defaults to match the Kyocera default setup on the applications. Many accounts use the Kyocera factory default settings and may not require further setup. For more information on the FRPO settings supported by the PRESCRIBE emulation option, see "FRPO: Firmware RePrOgram" on page 13.