Lexmark Multifunction Laser Clearing Jams Guide - Page 7
Continue, Cancel Job, Scan from Automatic Document Feeder, Scan from flatbed, Finish job without - fax
View all Lexmark Multifunction Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4 Raise the sheet guard. 7 Open the document cover, and remove any jammed pages. • Touch Restart job if job recovery is active and the job is restartable. The message clears. A new scan job containing the same parameters as the previous job starts. 5 Turn the paper advance wheel to the left to remove any jammed pages. Paper advance wheel 6 Close the ADF cover. 8 Close the document cover. 9 Touch Continue. 293 Jam A 293 jam indicates the MFP was sent a scan job, but found no original document in the ADF. To resolve a 293 Jam: • Touch Continue if no scan job is active when the attendance message appears. This clears the message. • Touch Cancel Job if a scan job is processing when the attendance message appears. This cancels the job and clears the message. • Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF immediately after the last successfully scanned page. • Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the flatbed immediately after the last successfully scanned page. • Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successfully scanned page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or FTP.