Lexmark Optra N model 240 Service Manual - Page 17
Diagnostic Information 2-4, Finisher, Top Output Bin Full
View all Lexmark Optra N model 240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4040 Finisher Message 43 Paper Jam (PI-3) 44 Paper Jam (PI-4) 45 Staple Jam 47 Finisher Bin X Full 48 Top Output Bin Full 49 Output Bins Full Action There is a paper jam at the top cover. If the error code does not clear after you clear the paper jam, go to the "Paper Jam, 43, Delivery Paper Sensor Service Check" on page 2-13. If there is still a problem after that, go to the "Symptom Table" on page 2-7. There is a paper jam at the staple tray or output bins1, 2, or 3. If the error code does not clear after you clear the paper jam, go to the "Paper Jam, 44, Staple Tray Paper Sensor Service Check" on page 2-13. If there is still a problem after that, go to the "Symptom Table" on page 2-7. The printer has detected a staple jam in the finisher. See the User's Guide. Empty the output bin identified in the message and select CONTINUE. Empty the top output bin and select CONTINUE. If this doesn't correct the problem, go to the Optra N Service Manual. All three output bins are full. Empty all three bins as well as the top output bin, if Top Bin Linking is set on. Then select CONTINUE. If this doesn't correct the problem, go to the "Distance Detecting Sensor Service Check" on page 2-10. Diagnostic Information 2-4