Lexmark Optra N model 240 Service Manual - Page 24
Paper Delivery Motor Service Check, Replace as necessary PN 11D0188, 11D0194.
View all Lexmark Optra N model 240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4040 Finisher Paper Delivery Motor Service Check 1 Connector 2 Paper Delivery Motor, M3, (58) 3 Finisher Driver Board (13-1) Be sure the J8 and J11 are properly connected to the finisher driver board, and the stapler assembly is properly installed and firmly plugged in. Unplug J11 from the finisher driver board. Measure the resistance between J11-6 and J11-7 on the motor side. If it does not read 42 Ohms, replace the paper delivery motor (PN 11D0142). If there is still a problem, replace the finisher driver board (PN 11D0294. Paper Delivery Service Check 1 Gears 2 Delivery Roller 1 and Delivery Roller 2 (6-25, 6-44) 3 Delivery Roller 1 Drive Belts (6-26) 4 Staple Tray Guide Stops (6-41, 6-30) 5 Reversing Shafts (7-27) 6 Swing Guide Exit Pressure Rollers. (7-7)' Check for and replace any broken or worn gears in the swing guide and stapler tray assembly. Check delivery rollers 1 and 2 for wear or damage. Replace as necessary (PN 11D0188, 11D0194). Check the delivery roller 1 drive belts for damage and proper tracking on delivery roller 1. Replace if necessary (PN 11D0189). Be sure the staple tray guide stops are not damaged. Also be sure they are positioned correctly. If they are positioned to the rear of the normal pivot point, they will not pivot to the normal rest position. Replace as necessary (PN 11D0207, 11D0202). Be sure the swing guide reversing shafts are not damaged. Also be sure they properly push paper into the staple tray when offsetting or stapling jobs (PN 11D0228). Check for and replace any damaged swing guide exit pressure rollers (PN 11D0216). 2-11