Lexmark T520 User's Guide - Page 109

35 Res Save Off Deficient Memory What this message means: The printer lacks the memory needed to enable Resource Save. This message usually indicates too much memory is allocated for one or more of the printer link buffers. What you can do: • Press Go to disable Resource Save and continue printing. • To enable Resource Save after you get this message: - Make sure the link buffers are set to Auto, and exit the menus to activate the link buffer changes. - When Ready is displayed, enable Resource Save from the Setup Menu. • Install additional memory. 37 Insufficient Collation Area What this message means: The printer memory (or hard disk, if installed) does not have the free space necessary to collate the print job. What you can do: • Press Go to print the portion of the job already stored and begin collating the rest of the job. • Press Menu to open the Job Menu and cancel the current job. 37 Insufficient Defrag Memory What this message means: The printer cannot defragment flash memory, because the printer memory used to store undeleted flash resources is full. What you can do: • Delete fonts, macros, and other data in printer memory. • Install additional printer memory. 107