Lexmark T520 User's Guide - Page 74
Between the envelope feeder and the printer, Flip the envelope weight back toward the printer.
UPC - 734646620000
View all Lexmark T520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
4 Slowly pull the jammed envelope straight out toward you. 5 Replace the stack of envelopes in the envelope feeder. 6 Adjust the envelope edge guide. 7 Lower the envelope weight to the stack. Note: If envelope jams continue to occur, repeat these steps and feed a single envelope between steps 4 and 5. This may correct the problem. Between the envelope feeder and the printer 1 Lift the envelope weight. 2 Flip the envelope weight back toward the printer. 3 Remove the stack of envelopes from the envelope feeder. 4 Push the envelope support to the closed position. 5 Open the printer upper front door. 72
72
4
Slowly pull the jammed envelope straight out toward you.
5
Replace the stack of envelopes in the envelope feeder.
6
Adjust the envelope edge guide.
7
Lower the envelope weight to the stack.
Note:
If envelope jams continue to occur, repeat these steps and feed a single envelope
between steps 4 and 5. This may correct the problem.
Between the envelope feeder and the printer
1
Lift the envelope weight.
2
Flip the envelope weight back toward the printer.
3
Remove the stack of envelopes from the envelope feeder.
4
Push the envelope support to the closed position.
5
Open the printer upper front door.