Home » Lexmark Manuals » Printers » Lexmark T632dtn » Manual Viewer

Lexmark T632dtn User's Reference - Page 265

DO NOT TURN POWER OFF, Close Door or Insert

UPC - 734646538404

Add to My Manuals
Save this manual to your list of manuals

Page 265 highlights

Understanding the printer messages Message What this message means What you can do Change Cartridge Invalid Refill The printer has detected a refilled Prebate cartridge. Remove the indicated print cartridge and install a new one. See also: Replacing the print cartridge Check Connection The specified device is either not fully connected to the printer or is experiencing a hardware failure. means: • Tray x with x being trays 2 - 5 • Duplex • Reestablish communication by removing the specified device and reattaching it to the printer. • Press Go to clear the message and continue printing. • In the case of a hardware failure, turn the printer off and back on. If the error recurs, turn the printer off, remove the specified device, and call for service. Clearing Job Accounting Stat The printer is deleting all job statistics Wait for the message to clear. stored on the hard disk. Close Door or Insert Cartridge The upper front door is open or the toner cartridge is not installed. • Close the upper front door. • Install the print cartridge. Close Finisher Door The finisher side door is open. Close the finisher side door to clear the message. Close Finisher Top Cover The finisher top cover is open. Close the finisher top cover to clear the message. Copying The printer is processing a copy job originating from an OptraImage™ scanner. Wait for the message to clear. Defragmenting The printer is defragmenting the flash Wait for the message to clear. DO NOT TURN POWER OFF memory to reclaim storage space occupied by deleted resources. Warning: Do not turn the printer off while this message is displayed. Delete All Jobs Go/Stop? The printer is requesting confirmation to delete all held jobs. • Press Go to continue. The printer deletes all held jobs. • Press Stop to cancel the operation. Deleting Jobs The printer is deleting one or more held jobs. Wait for the message to clear. Disabling Menus The printer is responding to a request to disable the menus. Wait for the message to clear. Note: While the menus are disabled, you cannot change the printer settings from the operator panel. See also: Disabling operator panel menus 265

Section	Page
Contents	2
Notices	8
Trademarks	9
Licensing notice	11
Safety information	12
Cautions, warnings, and attentions	12
Electronic emission notices	12
Without a network card installed	12
With a network card installed	14
Noise emission levels	16
Energy Star	16
Laser notice	16
Statement of limited warranty	17
Overview	20
Identifying printers	20
Basic models	20
Configured models	21
Printing	22
Tips for successful printing	22
Tips on storing print media	22
Avoiding jams	22
Sending a job to print	22
Canceling a print job	23
Canceling from the printer operator panel	23
Canceling a job from a computer running Windows	24
Printing the menu settings page	25
Printing a font sample list	25
Printing a directory list	26
Printing a confidential job	26
Entering a personal identification number (PIN)	27
Printing folio and statement sizes	27
Print media handling	29
Print media guidelines	29
Paper	29
Transparencies	34
Envelopes	35
Labels	36
Card stock	37
Storing print media	37
Identifying print media sources and specifications	38
Loading print media	48
Loading print media in standard and optional trays	48
Loading print media in optional universally adjustable trays	52
Loading letterhead	53
Using and loading the multipurpose feeder	55
Capacity	55
Print media dimensions	55
Trouble-free printing	55
Loading the multipurpose feeder	57
Loading paper and transparencies	61
Loading envelopes	62
Loading letterhead	63
Closing the multipurpose feeder	67
Using and loading the optional envelope feeder	68
Using and loading the optional 2000-sheet drawer	71
Changing the print media size for the 2000-sheet drawer	74
Linking trays	76
Using the duplex function	76
Duplex printing on letterhead	76
Using Duplex Bind	77
Using the output bins	78
Using the support extension in the standard bin	80
Maintenance	81
Maintaining your printer	81
Determining the status of supplies	81
Conserving supplies	82
Ordering supplies	82
Ordering a print cartridge	82
Maintenance kit	83
Ordering a charge roll	84
Ordering a transfer roller	84
Ordering pick rollers	84
Ordering a label fuser cleaner	85
Ordering staple cartridges	85
Storing supplies	85
Storing the print cartridge	86
Replacing the print cartridge	86
Removing the used print cartridge	86
Cleaning the printer	87
Installing the new print cartridge	88
Replacing the charge roll	90
Replacing the transfer roller	94
Replacing the pick rollers	98
Replacing the label fuser cleaner	101
Replacing the staple cartridge	104
Removing a used staple cartridge	105
Installing a new staple cartridge	106
Resetting the maintenance counter	108
Printer maintenance when printing on card stock	108
Printer maintenance when printing on labels	108
Troubleshooting	109
Solving basic printer problems	109
Checking an unresponsive printer	109
Solving display problems	110
Solving printing problems	110
Solving print quality problems	113
Solving option problems	115
Solving problems with the optional 2000-sheet drawer	118
Solving network printing problems	119
Solving other problems	119
Contacting service	119
Clearing jams	120
Avoiding jams	120
Avoiding jams hints	120
Before removing jams	121
Identifying the print media path	122
Accessing jam areas	123
200 and 201 Paper Jam Remove Cartridge	125
202 Paper Jam Open Rear Door	128
Before reaching the standard output bin	129
While exiting to the standard output bin	130
23x Paper Jam	131
231 Paper Jam Check Duplex	131
232 Paper Jam Check Duplex and 233 Paper Jam Check Duplex	135
234 Paper Jam Check Duplex, 235 Paper Jam Check Duplex, and 238 Paper Jam Check Duplex	137
236 Paper Jam Check Duplex	140
237 Paper Jam Check Duplex	141
239 Paper Jam Check Duplex	145
24x Paper Jam Check Tray x	151
On the incline surface of a tray or across two trays	152
Across three trays	153
Across a tray, the duplex unit, and the standard tray	154
250 Paper Jam Check MP Feeder	157
260 Paper Jam Check Env Feeder	158
At entry into the envelope feeder	158
Between the envelope feeder and the printer	159
27x Paper Jam Check Bin x	160
In an optional output bin	161
Between output bins	163
28x Paper Jam	164
280 Paper Jam Check Finisher	164
281 Paper Jam Check Finisher	165
In the optional 2000-sheet drawer	165
Clearing stapler jams	166
282 Staple Jam Check Stapler	167
283 Staple Jam Check Stapler	171
Administration	174
Disabling operator panel menus	174
Enabling menus	174
Restoring factory default settings	175
Understanding fonts	175
Typefaces and fonts	175
Bitmapped and scalable fonts	177
Resident fonts	178
Readability disclaimer	184
Symbol sets	184
Downloadable fonts	185
Using the Local Printer Setup Utility	185
Using the Print and Hold function	187
Selecting a user name	187
Printing and deleting held jobs	187
Accessing held jobs from the operator panel	187
Recognizing when format errors occur	188
Repeat Print	188
Reserve Print	189
Verify Print	189
Confidential jobs	189
Removing optional cards	190
Removing optional printer memory and other option cards	191
Removing an optional flash memory card or optional firmware card	194
Removing an option card	195
Reattaching the shield and closing the doors	197
Removing options	199
Removing the envelope feeder	199
Removing an optional output bin	201
Removing the printer from the duplex unit, removing a duplex unit from a drawer and removing a dr...	205
Understanding the operator panel	207
Indicator light	207
Using the operator panel buttons	207
Using the operator panel to change printer settings	209
Menus Disabled	210
Using the printer menus	211
Paper Menu	213
Finishing Menu	221
Utilities Menu	226
Job Menu	230
Quality Menu	234
Setup Menu	235
PCL Emul Menu	242
PostScript Menu	246
Parallel Menu	248
Network Menu	252
USB Menu	255
Serial Menu	258
Help Menu	263
Understanding the printer messages	264