Lexmark W820dn User's Guide - Page 224

Held Jobs Purpose: To print Reserve Print, Repeat Print, or Verify Print jobs stored in printer memory. First select your user name: User name Press Menu to scroll through the list of user names. Press Select to select your user name from the list on the display. Then select a value: Print All Jobs Print A Job Delete All Jobs Delete A Job Print Copies Prints all held jobs associated with your user name. Prints the specified held job. Press Menu to scroll through the list of held jobs. Press Select to print the specific job. Deletes all held jobs associated with your user name. Deletes the designated held job. Press Menu to scroll through the list of held jobs. Press Select to delete the job. Determines the number of copies for each held job. Press Menu to scroll through the list of held jobs. Press Select to specify the job you want to print. Press Menu to increase or decrease the number of copies, then press Select. See also: Printing and deleting held jobs Print Buffer Purpose: To print any data stored in the print buffer. Note: Print Buffer is only available when you enter the Job Menu while Waiting is displayed. The Waiting state occurs if an incomplete job is sent to the printer or an ASCII job, such as a print screen command, is printing. Prime Stapler Purpose: If your printer does not have automatic priming, this prepares the stapler for proper functioning after a staple cartridge is replaced or a staple jam is cleared. Priming Stapler is displayed, and the stapler inserts several staples into a sheet of paper. See also: Staple Prime Src; Priming the stapler 222