Lexmark X656DTE User Manual - Page 229

Menu item Symbol Set 10U PC-8 12U PC-850 PCL Emulation Settings Pitch 0.08-100 PCL Emulation Settings Orientation Portrait Landscape PCL Emulation Settings Lines per Page 1-255 PCL Emulation Settings A4 Width 198 mm 203 mm PCL Emulation Settings Auto CR after LF On Off Description Specifies the symbol set for each font name Notes: • 10U PC-8 is the US factory default setting. • 12U PC-850 is the international factory default setting. • A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown. Specifies the font pitch for scalable monospaced fonts Notes: • 10 is the factory default setting. • Pitch refers to the number of fixed-space characters per inch (cpi). • Pitch can be increased or decreased in 0.01-cpi increments. • For nonscalable monospaced fonts, the pitch appears on the display but cannot be changed. Specifies the orientation of text and graphics on the page Notes: • Portrait is the factory default setting. • Portrait prints text and graphics parallel to the short edge of the page. • Landscape prints text and graphics parallel to the long edge of the page. Specifies the number of lines that print on each page Notes: • 60 is the US factory default setting. 64 is the international default setting. • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page. Sets the printer to print on A4-size paper Notes: • 198 mm is the factory default setting. • The 203-mm setting sets the width of the page to allow the printing of eighty 10-pitch characters. Specifies whether the printer automatically performs a carriage return after a line feed control command Note: Off is the factory default setting. Understanding printer menus 229