Lexmark X658DFE Service Manual - Page 115

7462 Error code or message 906.xx 910.00 911.00 912.00 913.00 Error contents RIP interface driver error Pick arm motor stalled failure Pick arm motor overrun failure Pick arm motor underspeed failure Pick arm motor overspeed failure Description/Action Code detected unusual event or timing. The pick arm motor has stalled or become obstructed. The pick arm motor encoder continues to detect pulse after the motor stops. The pick arm motor does not rotate at the specified speed. The pick arm motor does not rotate at the specified speed. Possible repair actions 1. POR the machine and print a simple test page to determine if the problem is system software related, or if the customer is sending a corrupted print job. 2. Check all connections on the system card assembly. 3. Replace the system card assembly if problem remains. Go to "System card assembly removal (X651, X652, X654, X656, and X658)" on page 4-51. 1. Check all the connections on the pick arm assembly. 2. Check all the connections on the system card assembly. 3. Replace the pick arm assembly if problem remains. Go to "Pick arm assembly removal (X651, X652, X654, X656, and X658)" on page 4-29. 1. Check all the connections on the pick arm assembly. 2. Check all the connections on the system card assembly. 3. Replace the pick arm assembly if problem remains. Go to "Pick arm assembly removal (X651, X652, X654, X656, and X658)" on page 4-29. 1. Check all the connections on the pick arm assembly. 2. Check all the connections on the system card assembly. 3. Replace the pick arm assembly if problem remains. Go to "Pick arm assembly removal (X651, X652, X654, X656, and X658)" on page 4-29. 1. Check all the connections on the pick arm assembly. 2. Check all the connections on the system card assembly. 3. Replace the pick arm assembly if problem remains. Go to "Pick arm assembly removal (X651, X652, X654, X656, and X658)" on page 4-29. Diagnostic information 2-81