Lexmark X658DFE Service Manual - Page 162

7462 Sensor (ADF media exit) late jam service check Use this procedure for the following jams: • 291.02 Step Check Yes No 1 Check the original document condition. Go to step 2. Is the original document free of paper clips and staples as well as damage such as creases, tears, holes or excessive wear? 2 Check the media path for contaminates. Go to step 3. Is the media path free of excess media dust and foreign objects such as paper clips and staples? 3 Check the sensor (ADF media exit) for proper operation. Go to step 5. 1. Enter the Diagnostics Menu. 2. Touch SCANNER TESTS. 3. Touch Sensor Tests. 4. Observe the line "sensor (ADF media exit) Remove damaged original document and replace with a new undamaged original document. Perform a ADF test. If the problem remains, go to step 2. Remove all contaminates from the media path. Go to step 4. Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked? 4 Check the sensor (ADF media exit) for proper connection. Replace the Is the above component properly connected? sensor (ADF media exit). Replace the connection. Go to Go to "Sensor (ADF media exit) fan bracket assembly removal (models X652, X654, X656, and X658)" on page 4-87 or "Sensor (ADF media exit) bracket assembly removal (X651)" on page 4-88. 5 Check the ADF transport drive motor assembly for proper Replace the ADF Replace the connection. transport drive connection. Is the above component properly connected? motor assembly. Go to "ADF transport drive motor bracket assembly w/ cable removal (models X651, X652, X654, X656, & X658)" on page 4-74. 2-128 Service Manual