Lexmark XC6153 Quick Reference
Lexmark XC6153 Manual
 |
View all Lexmark XC6153 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark XC6153 manual content summary:
- Lexmark XC6153 | Quick Reference - Page 1
Quick Reference Copying Making copies 1 Load an original document into the ADF tray or on the scanner glass. Note: To avoid a cropped image, make sure that the original document and output have the same paper size. 2 From the home screen, touch Copy, and then specify the number of copies. If - Lexmark XC6153 | Quick Reference - Page 2
paper jams, do not remove trays while the printer is busy. 2 Adjust the guides to match the size of the paper that you are loading. 2 Note: Use the indicators on the bottom of the tray to position the guides. 3 Flex, fan, and align the paper edges before loading. 4 Load the paper - Lexmark XC6153 | Quick Reference - Page 3
match the size of the paper you are loading. • Load envelopes with the flap side up and against the left side of the paper guide. Load European envelopes with the flap side up and entering the printer first. 5 Insert the tray. If loading a paper type other than plain, set the - Lexmark XC6153 | Quick Reference - Page 4
Maintaining the printer Replacing a toner cartridge 1 Open door A. 4 Insert the new toner cartridge until it clicks into place. • ADF glass 5 Close door A. Cleaning the scanner 1 Open the scanner cover. • ADF glass pad 2 Remove the toner cartridge. 3 Unpack the new toner cartridge. 2 Using a - Lexmark XC6153 | Quick Reference - Page 5
properly • Make sure that the paper lies flat in the tray. Correct loading of paper Incorrect loading of paper • Make sure that the paper guides are positioned correctly and are not pressing tightly against the paper or envelopes. • Push the tray firmly into the printer after loading paper. Use - Lexmark XC6153 | Quick Reference - Page 6
Finisher jam locations 1 Door L 2 Door J 3 Door K 4 Door N Paper jam in trays 1 Pull out the tray. 3 Insert the tray. 4 Open the tray cover. 6 Close the tray cover. Paper jam in the multipurpose feeder 1 Remove paper from the multipurpose feeder. 2 Remove the jammed paper. Note: Make sure that - Lexmark XC6153 | Quick Reference - Page 7
2 Open door D. 4 Close door B. 5 Flex, fan, and align the paper edges before loading. 6 Reload paper. Paper jam in the automatic document feeder 1 Remove all original documents from the ADF tray. 3 Remove the jammed paper. Note: Make sure that all paper fragments are removed. Warning-Potential - Lexmark XC6153 | Quick Reference - Page 8
6 Open door E. Paper jam in the standard bin 1 Remove the jammed paper. Note: Make sure that all paper fragments are removed. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. 7 Remove the - Lexmark XC6153 | Quick Reference - Page 9
3 Open the fuser access door. Paper jam in the duplex unit 1 Open door B. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. 4 Remove the jammed paper. Note: Make sure that all paper - Lexmark XC6153 | Quick Reference - Page 10
2 Open door C. 5 Close the duplex cover and door B. Paper jam in the finisher bin 1 Remove the jammed paper. Note: Make sure that all paper fragments are removed. 3 Open door F. 4 Remove the jammed paper. Note: Make sure that all paper fragments are removed. 5 Close doors F and C. CAUTION-PINCH - Lexmark XC6153 | Quick Reference - Page 11
2 Open door G. 3 Pull out the staple cartridge holder. Note: Do not insert the staples that came out of the cartridge. 5 Close the staple guard. 6 Insert the staple cartridge holder. 4 Lift the staple guard, and then remove the loose staples. 7 Close doors G and C. CAUTION-PINCH HAZARD: To avoid - Lexmark XC6153 | Quick Reference - Page 12
Paper jam in door K 1 Open doors C and K. • Using knob J2 Note: Make sure that all paper fragments are removed. • Area J1 2 Remove the jammed paper. Note: Make sure that all paper fragments are removed. • Using knob K1 3 Close doors K and C. CAUTION-PINCH HAZARD: To avoid the risk of a pinch - Lexmark XC6153 | Quick Reference - Page 13
Paper jam in door N 1 Open door N. Paper jam in door L 1 Open door L. Paper jam in the staple finisher bin 1 Open door J. 2 Remove the jammed paper. Note: Make sure that all paper fragments are removed. 2 Remove the jammed paper. Note: Make sure that all paper fragments are removed. 2 Remove the - Lexmark XC6153 | Quick Reference - Page 14
Staple jam in door J 1 Open door J. 2 Remove the staple cartridge holder. 3 Open the staple guard, and then remove the loose staples. 5 Insert the staple cartridge holder. 6 Close door J. Note: Do not insert the staples that came out of the cartridge. 4 Close the staple guard. 14
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
 |
 |
Quick Reference
Copying
Making copies
1
Load an original document into the ADF tray or on the scanner
glass.
Note:
To avoid a cropped image, make sure that the original
document and output have the same paper size.
2
From the home screen, touch
Copy
, and then specify the
number of copies.
If necessary, adjust the copy settings.
3
Copy the document.
Note:
To make a quick copy, from the control panel, press
.
Copying on both sides of the paper
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch
Copy
>
Paper Setup
.
3
Adjust the settings.
4
Copy the document.
Copying multiple pages onto a single
sheet
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch
Copy
>
Pages per Side
.
3
Adjust the settings.
4
Copy the document.
Faxing
Sending a fax
Using the control panel
1
Load the original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch
Fax
, and then enter the needed
information.
3
If necessary, configure other fax settings.
4
Send the fax job.
Using the computer
Note:
Make sure that the Universal Fax driver is installed.
For Windows users
1
With a document open, click
File
>
Print
.
2
Select the printer, and then click
Properties
,
Preferences
,
Options
, or
Setup
.
3
Click
Fax
>
Enable fax
, and then enter the recipient number.
4
If necessary, configure other fax settings.
5
Send the fax job.
For Macintosh users
1
With a document open, choose
File
>
Print
.
2
Select the printer and enter the recipient number.
3
If necessary, configure other fax settings.
4
Send the fax job.
E-mailing
Sending an e-mail
Using the control panel
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch
E-mail
, and then enter the
needed information.
Note:
You can also enter the recipient using the address
book or shortcut number.
3
If necessary, configure the output file type settings.
4
Send the e-mail.
Using the shortcut number
1
From the control panel, press
#
, and then enter the shortcut
number using the keypad.
2
Send the e
‑
mail.
Printing
Printing from a computer
Note:
For labels, card stock, and envelopes, set the paper size
and type in the printer before printing the document.
1
From the document that you are trying to print, open the Print
dialog.
2
If necessary, adjust the settings.
3
Print the document.
Printing confidential and other held
jobs
For Windows users
1
With a document open, click
File
>
Print
.
1