LiftMaster 84602 Owners Manual - English French Spanish - Page 12
Tighten the Chain
View all LiftMaster 84602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Assembly 1 Attach the I- Beam Chain Rail to the Garage Door Opener 87802 2 Attach the Chassis Support Bracket To avoid SERIOUS damage to garage door opener, use ONLY those bolts/fasteners mounted in the top of the opener. NOTE: ONLY use the bolts removed from the garage door opener. Place the garage door opener on the packing material to prevent scratching. 1. Remove the two bolts from the top of the garage door opener. 2. Align the holes in the rail with the holes in the garage door opener. 3. Fasten the rail with the previously mentioned bolts. Cut away and discard the tape and Styrofoam from around the rail. 4. Position the chain around the garage door opener sprocket. 5. Attach the chain spreader to the garage door opener with screws. 6. Guide the chain around the selected groove in the chain spreader. HARDWARE To avoid possible SERIOUS INJURY to finger from moving garage door opener: • ALWAYS keep hand clear of sprocket while operating opener. • Securely attach sprocket cover BEFORE operating. 1. Position the chassis support bracket on the unit. 2. Attach the bracket to the rail with 1/4"-20 x 5/8" hex bolts and lock washers. Do not overtighten. 3. Attach the bracket to the opener by inserting a 5/16"-18 x 1/2" washered screw through a hole in each side flange and a matching hole in the bracket. Complete the connection by inserting the #8-32 x 3/8" screw through the back flange and the hole in rail support. Lock Washer Hex Bolt 1/4"-20x5/8" Screw #8-32x3/8" Washerd Bolt 5/16"-18x1/2" Washered Bolt 5/16"-18x1/2" (Mounted in the garage door opener) Washered Bolt 5/16"-18x1/2" Hex Screw #8x3/8" (Packed with the sprocket cover) Hex Screw #8x3/8" 12