LiftMaster 84602 Owners Manual - English French Spanish - Page 40
Remote Control, To Open the Door Manually, TO ADD, REPROGRAM
View all LiftMaster 84602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Operat ion 1 2 Press to continue. 3 Press to continue. 1. Press and hold the black adjustment button on the garage door opener until 3 beeps are heard (Approximately 6 seconds). ERASE THE CAMERA SETTINGS 1. Press and hold the reset button on the side of the camera for 10 seconds. The LED light will turn off, then flash red. You will need to set up your camera again after resetting it. 4 LED LEARN Button OR ???? PIN TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL USING THE LEARN BUTTON 1. Press and release the LEARN Button on the garage door opener. 2. Press and hold the button on the remote control that you wish to use. Release the button when the garage door opener lights blink or two clicks are heard. Reset Button Adjustment Button 1 2 "click" "click" LEARN Button LEARN LED To Erase the Memory ERASE ALL REMOTE CONTROLS AND KEYLESS ENTRIES 1. Press and hold the LEARN button on garage door opener until the learn LED goes out (approximately 6 seconds). All remote control and keyless entry codes are now erased. Reprogram any accessory you wish to use. 1. Press and hold the LEARN button on garage door opener until the learn LED goes out (approximately 6 seconds). 2. Immediately press and hold the LEARN button again until the learn LED goes out. All codes are now erased. Reprogram any accessory you wish to use. 40