LiftMaster PPWR PPWR Passport Wiegand Reciever Manual - Page 2
User Interface, Programming Commands
View all LiftMaster PPWR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
USER INTERFACE The PPWR user interface consists of a 22 character by 5 line LCD display, 3 "soft keys", Down/Up arrows and a numeric keypad. Scroll Indicator If more than 3 options exist, a scroll indicator appears on the left margin of lines 2, 3, and 4. The scroll indicator shows the relative position within the list. Antenna Connection For the direct antenna or the antenna extension kit. Line 1: Menu and function mode. Lines 2, 3, and 4: Menu selections and data. Line 5: Soft key function modes. Backup memory module indicator (LiftMaster® logo screen only) Menu/Data selection shown in inverse font. LCD Screen System programming and status display. "SOFT" Keys Soft key functions are defined by the label on line 5 of the display. The functions change according to the menu selection. Down/Up Keys For navigation in the menus. Numeric Keypad Numeric data is entered through the numeric keypad. PROGRAMMING COMMANDS The table below describes the commands used to program the receiver. Insert wiring MAIN MENU COMMAND DESCRIPTION WIEGAND FORMAT 26 BIT (DEFAULT) 30 BIT 31 BIT 34 BIT EVEN 34 BIT ODD 50 BIT 26 Bit Wiegand output code. 30 Bit Wiegand output code. 31 Bit Wiegand output code. 34 Bit EVEN Wiegand output code. 34 Bit ODD Wiegand output code. 50 Bit Wiegand output code. BUTTON FILTER BUTTON 1 IS ON BUTTON 2 IS ON BUTTON 3 IS ON Used when multiple receivers are within range of each other. MODE SELECT PASS THRU (DEFAULT) ADVANCED Passes all received remote control signals to the access system host controller. Receiver only passes signals from a remote control with a previously programmed facility code. All other signals are blocked. SECURITY TABLE If advanced mode is turned off this option is disabled and will appear as NOT AVAILABLE FOR PASS THRU MODE PROGRAM LIST CHANGE FC OUT DELETE SETTINGS PIN DEALER INFO FIRMWARE VERSION BEEP MEMORY DUPLICATE MEMORY RESTORE MEMORY CONTRAST LANGUAGE FACTORY DEFAULT Learn a facility code from any remote control in a batch that the PPWR will respond to. Also used to resolve any conflicts in code translation. Displays a list of all programmed facility codes showing facility code conflicts and facility code changes. Options to delete or resolve facility code conflicts. Change the 6-digit PIN number for the receiver. Display and edit the dealer 10-digit phone number. Displays the current firmware version. Turn the audible feedback on or off. Creates a memory backup. A memory module must be installed. Restores a memory backup from a memory module. An indicator appears on the LiftMaster® logo screen if a backup memory module is installed. NOTE: Content of memory module will over-write any information already stored in the receiver memory. Press Down or Up arrows to adjust LCD contrast. Sets language: English (Default), Spanish, and French. Reset receiver settings to factory default. 2