Linksys PCM200 User Guide - Page 22
Primary Network Logon - windows 98 driver
UPC - 745883549450
View all Linksys PCM200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Linksys Instant EtherFast® Series 6. If you want to assign access passwords, type the passwords into the Password boxes. 7. When you're done, click on the Apply button, followed by OK. Repeat steps 1-7 for any drive or folder you desire to share on the network. You have successfully enabled File Sharing on your PC. Your selected drives can now be accessed by other network users. If a user tries to access one of your password-protected drives or folders, he or she will be asked for the appropriate Read-Only or Full-Access password. Continue on if you wish to share your PC's printer over the network. Enabling Printer Sharing 1. On your Desktop, double-click on the My Computer icon. 2. Double-click the Printers folder. A window of available printers will appear. 3. Using your right mouse button, click once on the printer that you want to share with other users. Click on Sharing, followed by the Sharing tab. 4. Click on Share As. In the Share Name box, give a name to the printer you want to share. If you want to assign a password to the printer so that only certain users can access it, type a password in the Password box. 5. Click on the Apply button, followed by OK. Your printer(s) are now shared. Note: Not all printers may be shared on the network. Others may require special instructions. Refer to your printer's user guide or contact your printer manufacturer if you think this may be the case with your printer. The Printer Sharing setup and installation is complete. Your printer can now be accessed by other network users. The printer's driver may have to be installed on other PCs. Consult your printer's documentation. EtherFast® 10/100 CardBus PC Cards Novell NetWare 3.x Client Setup for windows 98 or 95 The instructions below explain how to set up the regular Novell NetWare 3.x client for use on a Windows 98 or 95 PC. 1. Follow the Windows 95 setup instructions or the Windows 98 setup instructions. 2. Start up Windows 95 or 98. Click on Start, Settings, then Control Panel. Double-click on Network. The Network window appears. Click on the Configuration tab. 3. Make sure that Client for Microsoft Networks and Client for Netware Networks are listed. If either are missing, you will have to install them manually. Refer to Manually Installing Network Components in Windows 98 and 95 on page 44. 4. In the Primary Network Logon box, choose Client for NetWare Networks. 5. Under the The following network components are installed box, highlight Client for NetWare Networks and click on the Properties button. 6. The Client for NetWare Networks Properties window appears. Under the General tab, enter the name of your network's Preferred Server. Assign the First Network Drive Letter; the default is F. If available, make sure the Enable logon script processing is checked. Click OK. 7. Click on the Access Control tab. Make sure the Share-level access control option is selected; do not select User-level access control. 8. When you're done, click OK to restart your computer. The NetWare portion of your Windows setup is complete. 38 39