Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 190

Configuring Dial Plans Resetting the Control Timers 8 STEP 9 If you need to configure a dial plan for any other extensions on the phone (depending on the model), click the appropriate Extension tab, enter the dial plan, and submit the changes. STEP 10 Verify that you can successfully complete a call using each digit sequence that you entered in the dial plan. NOTE If you hear a reorder (fast busy) tone, you need to review your entries and modify the dial plan appropriately. See "Digit Sequences," on page 170. Resetting the Control Timers You can use the following procedure to reset the default timer settings for all calls. NOTE If you need to edit a timer setting only for a particular digit sequence or type of call, you can edit the dial plan. See "About Dial Plans," on page 168. STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click Voice tab > Regional. STEP 4 Scroll down to the Control Timer Values section. STEP 5 Enter the desired values in the Interdigit Long Timer field and the Interdigit Short Timer field. Refer to the definitions at the beginning of this section. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 179