Linksys WVC54GCA-RM User Guide - Page 19

Chapter 4 Setup > Recording Schedule To set up a recording schedule for a Camera, then click the Recording Schedule tab. Installing and Using the Camera Utility Memory Requirements for Video Recordings You may find it helpful to know how much memory is required to hold a video recording. For information on estimated bit rates for a typical video recording at each available resolution and video, refer to Setup > Image, page 23. NOTE: In order for the scheduled recordings to occur, the Camera Utility must be running on a networked PC. NOTE: The maximum length of a recording file is one hour. If a recording is more than one hour long, then multiple files will be saved. Setup > Preferences To configure the Camera's preference settings, click the Preferences tab. Setup > Recording Schedule To schedule a recording for a Camera, follow these steps. 1. Fill in the following fields. •• Select a Camera Select the Camera that will be recorded from the drop-down menu. •• Schedule Interval Select the days on which you want the Camera to record. The choices are One Time, Every Day, Mon-Fri, Sat-Sun, Sun, Mon, Tue, Wed, Thu, Fri, and Sat. (All settings except One Time cause recording to occur on a recurring basis.) •• Start Date (mm-dd-yyyy) Enter the date to start the recording, in mm-dd-yyyy format. •• Start Time (hh:mm) Enter the time to start the recording, in hh:mm format. •• Duration (hh:mm) Enter the duration of the recording in hh:mm format. 2. Click Add to save the new scheduled recording information. 3. The scheduled recording will appear in the list of scheduled recordings at the top of the screen. To delete a scheduled recording, select the recording from the list, and click Delete. Click Help to display help information. Click Exit to exit without saving your changes. Setup > Preferences The Setup > Preferences screen allows you to configure the following settings. Recording Path Recording This is the drive and folder where recorded video files will be saved on your computer. The default is C:\Program Files\Wireless-G Internet Home Monitoring Camera\storage. Wireless-G Internet Home Monitoring Camera 18